DEVIMAT™ DTIF 150 SERIES

MULTI-PURPOSE ELECTRIC HEATING MATS

Full Range of Products
The devimat DTIF is a self adhesive mesh, with ultra thin cable pre-attached.

It comes in a full range of sizes, from 0.5m-12m and are available in both 100W and 150W per m² for installation onto both concrete and timber floors.

The mat is simply rolled out, cut and turned to fit the available free floor area and the chosen floor covering is then laid. As the cable is a twin conductor, there is no second tail to return to the thermostat, saving on installation time and cost.

The system is best suited to the devireg 130 or 550.

Choosing a deviMat™
In order to obtain the optimal floor heating solution it is important that you choose the correct devimat - both as regards size and wattage. Click the More button below to find out more about choosing the right Devimat.

Installing DeviMat™
Take a look at our step-by-step guide to the installation of the Devimat self-adhesive underfloor heating mat.

Model	Load (Watts)	Wire Thickness	Dimensions	Conductor	Conductor Insulation	Rated Temperature

		devimat™150 DTIF Series The Devimat 150 Series is ideally suited to heating Tiled Concrete floors
1.0 m²	150 W	3mm	50 cm x 200 cm	Twin	FEP, Teflon	120°C
1.5 m²	225 W	3mm	50 cm x 300 cm	Twin	FEP, Teflon	120°C
2.0 m²	300 W	3mm	50 cm x 400 cm	Twin	FEP, Teflon	120°C
2.5 m²	375 W	3mm	50 cm x 500 cm	Twin	FEP, Teflon	120°C
3.0 m²	450 W	3mm	50 cm x 600 cm	Twin	FEP, Teflon	120°C
3.5 m²	525 W	3mm	50 cm x 1200 cm	Twin	FEP, Teflon	120°C
4.0 m²	600 W	3mm	50 cm x 800 cm	Twin	FEP, Teflon	120°C
5.0 m²	750 W	3mm	50 cm x 1000 cm	Twin	FEP, Teflon	120°C
6.0 m²	900 W	3mm	50 cm x 1200 cm	Twin	FEP, Teflon	120°C
7.0 m²	1050 W	3mm	50 cm x 1400 cm	Twin	FEP, Teflon	120°C
8.0 m²	1200 W	3mm	50 cm x 1600 cm	Twin	FEP, Teflon	120°C
9.0 m²	1350 W	3mm	50 cm x 1800 cm	Twin	FEP, Teflon	120°C
10.0 m²	1500 W	3mm	50 cm x 2000 cm	Twin	FEP, Teflon	120°C
12.0 m²	1800 W	3mm	50 cm x 2400 cm	Twin	FEP, Teflon	120°C